Huawei P50: Renders show a huge camera module like the P50 Pro
from Fabian Menzel 
on March 13, 2021, 11:42 pm | Write a comment
We reported about that just a few days ago P50 Pro, whose display is said to be slightly rounded on all four sides and to have a huge, eye-catching camera module on the back. Now the first pictures of the regular Huawei P50 have also been leaked. There are said to be slight design differences compared to the Pro model.
Let's start with the dimensions of the smartphone first. It is said to measure 156,7 x 74 x 8,3 mm, making it noticeably larger than last year's predecessor, the Huawei P40, should be. The front and back should be made of glass and the frame should be made of metal. When looking at the front, the biggest differences are noticeable compared to the Pro model, because while the display of the P50 Pro is said to be slightly rounded on all four sides, the regular P50 appears to use a completely flat panel. The edges around the display also appear a little larger, which can be seen relatively well in the picture below. The large 6,3-inch OLED display is interrupted by a small, centrally located punch hole in which the front camera can be found. Huawei is also said to integrate the fingerprint sensor into the display. It also reports OnLeaks that a jack connection and even stereo speakers should be on board.
The back, however, is said to be barely different from that of the P50 Pro. Here, too, there is said to be space for a massive, oval camera bump, which houses two huge circles. Huawei could probably give the P50 a triple camera, although there is no concrete information on this yet. According to current information, the upcoming Huawei P50 series will be presented to the public on April 17th and will unfortunately only be very difficult to get in Europe.
Image: OnLeaks / Voice
Source: OnLeaks / Voice